How To Adjust Garage Door Tracks

    Is your garage door not opening or stuck wide open? Looking for a professional repair technician?

    Get in touch with our garage door repair team and help is on it’s way! When it comes to garage door repair in Sacramento and its surroundings, Better leave it up to the professionals. For a FREE quote and estimate..

    CALL NOW: ☎️ (916) 767-0960

    Or, fill out this form and we will contact you shortly

    Show us the damage: Send us some photos for a FREE cost estimate.

    garage door spring replacement sacramento

    Are your garage doors giving you trouble?

    It is time to make some track modifications then.

    Garage doors are pretty delicate.

    And there are a variety of reasons why it may occasionally jam or have difficulty opening or closing.

    Perhaps something bumped against it, or its parts have begun to rust over time, and so on.

    Once you’ve identified the problem, you’ll need to align your garage door tracks.

    You’re ready to go as long as you have the necessary tools and equipment.

    Or better yet, call our experts at Fix&Go Sacramento.

    We can help you with your garage door repair in Sacramento.

    Follow the actions outlined below to know how to adjust the tracks of your garage door tracks.

    Adjusting The Garage Door Tracks

    Track Screws Loosening

    There are several bolted screws around the tracks to secure the garage door frame.

    Using a screwdriver, loosen them. Before moving on to the following stage, make sure it’s loose enough.

    Track Position Adjustment

    Using a rubber mallet, adjust the garage door track position.

    You should not use a regular hammer since it can damage the door tracks.

    Apply optimal force on the bottom of the door track with the rubber mallet to correct its position.

    You can also use a level tool to verify that you’re in the best possible position and avoid making any mistakes.

    Track Screws Tightening

    You finish adjusting your garage door tracks by tightening the screws one more time.

    If necessary, repeat the instructions for the remaining tracks.

    Other Track Adjustments

    After the adjustment of one, you’ll need to alter the other.

    As a result, use a rubber mallet to hit the track at the bottom to verify it’s precisely straight.

    You then make sure you have tightened screws.

    You’ve perfectly made your garage door track adjustment with a few simple actions.

    Many people wonder, “How can I make a garage door’s tracks so they don’t scrape against the rubber molding?”

    Surprisingly, you can achieve it in the following simple steps:

    Adjusting Garage Tracks To STop Rubbing Against Molding

    Track Bolts Loosening

    First and foremost, use a wrench to loosen the bolts that hold each track to its lower track bracket.

    Check on the loosened nuts on both tracks before moving on to the next step.

    Garage Door Gap Adjustment

    Move one of the tracks left or right until the stop molding, and the gap is about 1/4 inches.

    Remember that the gap should be uniform, and repeat the process on the other track to ensure that the gap is uniform.

    Track Bolts Tightening

    Last but not least, use a tool to tighten the track bolts.

    Check how tight you fasten them, don’t overtighten them.

    More To Consider

    However, keep in mind that there are various reasons why a garage door won’t work correctly.

    As we mentioned before, if you damage the hardware, it can be one reason for a garage door not to work correctly.

    The hinges, bolts, springs, and even the door itself are all examples of this.

    So, before checking, make sure to inspect your garage door thoroughly.

    If you discovered a damaged material, you should replace it as quickly as possible to avoid future issues.

    Always keep in mind that the sooner you take care of your garage door, the fewer issues you’ll have.

    Never Underestimate The Importance Of Garage Door Alignment

    When it comes to garage doors, nothing is ever permanent.

    No matter how high-grade the material is, its quality will deteriorate over time.

    So, whenever your garage door begins to malfunction, keep your eyes peeled.

    Fixing it right away saves you a lot of money over replacing the entire door.

    There’s no disputing that alignment issues are a headache to deal with.

    However, by following the easy procedures outlined above, you can finally put an end to your garage door issues.

    Tips To Remember

    Here are a few things to consider when it comes to garage doors to avoid having to adjust your garage door tracks from time to time.

    The Key to Success is Proper Planning.

    These kinds of issues could be the result of poor planning.

    Is your garage door too large or too little for it?

    Or are the materials suitable for your preferred garage door?

    Anything might happen!

    When picking a garage door, a golden rule of thumb considers how it appears and the door’s quality.

    When it comes to installing a garage door, hire an expert.

    If you want to do things on your own, there’s nothing wrong with it.

    If you don’t have the expertise, though, don’t be afraid to employ a mechanic.

    Keep in mind that the price will differ based on who you hired.

    However, a few dollars spent today will save you time and money in the future.

    Materials are important.

    When it comes to garage door hardware, quality should always take precedence above cost.

    Poor performance will be the outcome of low-cost hardware.

    So don’t be afraid to stretch your budget anymore.

    Always remember that you should never settle for less when it comes to garage door hardware, even if it means paying royalties.

    It’s also a wise investment since you’ll never have any troubles if you choose high-quality gear.

    Lubricants are Essential

    A garage door may simply require a little lubrication to perform correctly.

    Because garage door lubricants are inexpensive, there’s no reason not to acquire one.

    A lubricant will not only make your garage door run smoother but will also make it quieter.

    It aids in the prevention of future garage door issues at an affordable cost.


    We must maintain the condition of our garage doors.

    Although adjusting its door tracks is simple, it pays to invest in high-quality hardware to avoid headaches.

    However, if problems worsen, call us at Fix&Go Sacramento before doing more damage in the long term.

    We can also provide you with your garage door installation in Sacramento.

    Contact us now to know more about how to adjust garage door tracks.

    Rate this post

    Recommended articles

    Call Now
    Our technicians are equipped with masks and gloves complying with health and safety regulations.
    This is default text for notification bar